Filter
Top Products
56
Inter-Tel
®
Model 8524/8525/8526 User Guide
MOVING ON
Creating Station Speed-Dial Buttons
If your telephone system supports it, you can program the programmable buttons as
speed-dial buttons by selecting a speed-dial number to associate with the button.
NOTE: Before you program a speed-dial button, you need to store a number in a
speed-dial location (see the previous instructions).
To program a user-programmable function button as a Station Speed-Dial but-
ton:
1. Press and dial .
2. Press the feature button you want to change into a Station Speed-Dial button.
3. Dial (default Station Speed Dial feature code).
4. When the display asks for a number, dial a digit 0-9. This is the station speed-
dial number “location.”
You can now use the procedure outlined on page 54 to program and use the Station
Speed-Dial button.
To view the current programming of Station Speed-Dial buttons:
1. Press and dial .
2. Press the Station Speed-Dial button (e.g., ) to be viewed.
3. Press to exit.
To erase a station speed-dial name and/or number:
NOTE: To erase a station-dial name and/or number, you must pre-program the Back-
space button (feature code 314) on your endpoint. Refer to page 59, Programming You
Feature Buttons section for details on how to program the backspace button.
1.
Press and dial .
2. Dial the location code (0-9) to be erased.
3. To remove the name: Press the Backspace button (e.g., ) repeatedly
until the name is erased.
4. Press to continue.
5. To remove the number: Press the Backspace button (e.g., ) repeatedly
until the number is erased.
6. Press to exit.
START 3 9 7
3 8 2
START 3 9 6
LINE 9
# >
START 3 8 3
FNC 3
# >
FNC 3
# >