Filter
Top Products
9
SET KEY
Used to set the clock.
HOUR KEY
Used to set the clock hour.
MINUTE KEY
Used to set the clock minutes.
BACK SPACE ( ) KEY
Allows editing of telephone number in store operation
CALL TIMER
When a call is in progress, the word “TIMER” on the display. When the call is terminated,
the call duration will be automatically displayed for 6 seconds.
MUTE KEY AND INDICATOR
When pressed, it cuts off transmission from the Handset, Headset and Handsfree
microphones to allow users privacy. The red light indicates when the mute condition is
active. Press MUTE again to release the mute condition.
BASIC OPERATION
IQ560E can be used in the same way as a normal telephone; simply lift the HANDSET
to answer an incoming call, or lift the HANDSET and dial on the KEYPAD to commence
an outgoing call. Please refer to other sections for detailed operation instructions.
REDIAL KEY
Press to redial the last number previously dialed, which may be up to 32 digits long.
When pressed while still on-line, the telephone will clear that call and retry the number.
It can be used in handset, handsfree, and headset modes. Dialing more than 32 digits
during one call will cause erasure of the entire number from the REDIAL memory.
IQ560E MANUAL ON-LINE VERSION_070518.p65 2007/5/18, ¤W¤È 09:569