Filter
Top Products
19
6. MEMORY FEATURE OPERATION
The telephone has 20 memories in total, distributed over 15 keys, to provide easy dialing
of often-used numbers. The upper row of 5 memory keys has both one and two touch
memories, and the lower rows of 10 memory keys each have a one touch memory (see
Figure 5).
NON-VOLATILE MEMORIES (BATTERY FREE PERMANENT STORAGE)
Each memory can store 24 digits with any combination of numeric entries, PAUSE , ,
and Recall commands. Batteries are not required to back up the memories of the
IQ560E. They will be permanently retained until overwritten by a new storage operation
for the user.
EEPROM MEMORY FEATURE
The IQ560E can be pre-set with user-selected codes for the 10 Memories accessible
from the five Memory buttons located near the display (five ONE TOUCH and five TWO
TOUCH memories). Any often-used or complex network numbers or network facility
codes can be installed at the point of sale to eliminate the need to consult confusing
system user guides. Custom-programming can enhance and simplify phone and network
operation, thereby reducing the demands on staff training. The pre-programming can
alter at a later stage to allow changes to be made - see the MEMORY LOCK section
below.
Storing a number:
1. Lift HANDSET or press HANDSFREE or HEADSET,
2. Press STORE,
3. Enter the telephone number,
4. Press the desired MEMORY key either once for a “ONE TOUCH” memory (any
memory button), or twice for a “TWO TOUCH” memory (only the top row near the
display).
5. Replace HANDSET or press HANDSFREE or HEADSET.
IQ560E MANUAL ON-LINE VERSION_070518.p65 2007/5/18, ¤W¤È 09:5619