Filter
Top Products
21
7. INSTALLATION
UNPACKING
The carton contains the following:
• Telephone body and handpiece.
• Coiled handset cord and line cord.
• User Manual or Quick Start-up Gudie.
GENERAL SETTING-UP
1. Fit the COILED CORD to the appropriate sockets in the HANDSET and the telephone
base – please do not connect it to the HEADSET socket located on the side.
2. Fit the LINE CORD to the rear socket and to your telephone network outlet.
3. Set the Ringer Volume and the Ringer Pitch controls.
4. See following sections to complete the installation.
LOCATION
The telephone should be placed on a desk, table or shelf where it is not likely to be
pushed off. If the unit is to be wall-mounted, it should be seated securely on the WALL
MOUNTING BRACKET (please order separately). Avoid excessive heat, damp, dust,
direct sunlight, vibration, and other appliances or devices which may transmit or emit
electrical or electromagnetic radio frequency noise or signals (e.g. computers, welders,
pagers).
WALL MOUNTING
1. To enable the HANDSET to be supported in the cradle, follow the procedure
shown in (Figure 4A) to reverse the HANDSET RETAINER
2. Fit the WALL MOUNT BRACKET (optional, not supplied) to the underside of the
telephone and mount on the MODULAR WALL JACK (see Figure 4B).
3. During item 2 above, ensure that the link cord is connected as shown to the
telephone and wall jack.
IQ560E MANUAL ON-LINE VERSION_070518.p65 2007/5/18, ¤W¤È 09:5621