Filter
Top Products
28
DATA PORT SWITCH
The data port switch (SHARED or SPLIT) determines whether the data port shares the
line with the telephone (position “shared”) or has its own line (position “split)
SHARED MODE
This mode uses one analog telephone line and provides the user with access to a Data
Port, but in this mode the telephone’s voice capability is disabled while the Data Port is
in use. The line cord as supplied is terminated with RJ45 at the wall end. For Shared
mode the telephone line should be terminated on pins 4 and 5 of the matching RJ45
compatible wall socket. Different plug or cord types can be provided to suit your wall
socket – please contact Interquartz or your dealer. The telephone will be factory set in
SPLIT mode.
SPLIT MODE
To enable the user to simultaneously access both the Data Port and the telephone (i.e.
“SPLIT” mode) a second analog line must be allocated to the Data Port, and the Data
Port Mode Switch must be set to Split mode. The line cord as supplied is terminated
with RJ45 at the wall end, with the voice pair in the middle (pins 4 and 5) and the
dedicated data line pair (for “Split” mode) on pins 3 and 6. For Split mode the telephone
line pair should be terminated on pins 4 and 5 of the matching RJ45 compatible wall
socket. The new dedicated analog DATA line pair must be terminated on pins 3 and 6
of the RJ45 compatible wall socket where the voice pair is also located. Different plug
or cord types can be provided to suit your wall socket – please contact Interquartz or
your dealer. The telephone will be factory set in SPLIT mode. The Data Port Mode
Switch is found on the underside of the telephone (See Figure 6).
FIGURE 7 PIN ASSIGNEMNT OF RJ45 LINE CORD PLUG
IQ560E MANUAL ON-LINE VERSION_070518.p65 2007/5/18, ¤W¤È 09:5628