Filter
Top Products
19
NS-SH513 Bluetooth/CD Compact Shelf System
www.insigniaproducts.com
Troubleshooting
Problem Solution
No power to the
unit.
• Make sure that the power cord is fully inserted in the power outlet.
• Make sure that the power switch on the back of the unit is turned on.
The remote control
does not work.
• Make sure that the batteries are fresh.
• Make sure that you are aiming the remote control at the front of the unit
and that the remote control sensor is not blocked.
“No Disc” error • Make sure that there is a CD in the disc tray.
• Make sure that the CD disc is correctly inserted (label side up).
• Make sure that you are using a compatible disc. (CDs, CD-Rs, and CD-RWs in
standard or 3” size.)
• Make sure that the disc is not dirty or scratched.
No sound. • Make sure that power is connected and your unit is turned on.
• Make sure that the power switch on the back of the unit is turned on.
• Make sure that the speakers are correctly connected.
• Make sure that your external device is turned on and is playing.
• Make sure that the volume on your external device is turned up and is not
set to mute.
• Make sure that the volume is not extremely low.
• Make sure that the correct source has been selected.
• Verify all connections.
• Make sure that no wires or cables are damaged or broken.
• Disconnect the headphones. Sound will be muted if headphones are
connected.
The CD skips while
playing.
• Make sure that you are using a standard CD (normal size and shape) or 3”
CD.
• Make sure your CD is a compatible format.
• Make sure that you do not move your compact shelf system while it is
playing and that it is positioned on a flat, steady surface.
• Clean the CD by wiping outwards from the center (not in a circle) with a
clean cloth. If a dry cloth does not clean the CD, wipe the CD with a slightly
moistened, soft cloth, then dry it with a soft cloth. Do not use any solvents
to clean CDs.
• Your CD may be damaged. Try playing another CD.
What should I do if
my CD will not play?
• Make sure that the CD is correctly inserted with the label facing up.
• Make sure that the correct audio source is selected.
• Clean the CD by wiping outwards from the center (not in a circle) with a
clean cloth. If a dry cloth does not clean the CD, wipe the CD with a slightly
moistened, soft cloth, then dry it with a soft cloth. Do not use any solvents
to clean CDs.
• Make sure that your CD is compatible. Your boombox can play CDs, CD-Rs,
and CD-RWs. Your CD may be damaged. Try playing another CD.
“Invalid” display on
the display
• Unplug and reconnect the power cord.
Severe hum or noise
or can’t receive FM
stations.
• Make sure that FM reception is adequate. Move the antenna or move the
unit away from possible sources of interference.
• The FM signal may be weak. Select a different station.
NS-SH513_14-1143_MAN_V2_ENG.fm Page 19 Tuesday, October 14, 2014 4:09 PM