Insignia NS-SH513 Bluetooth Headset User Manual


 
12
NS-SH513 Bluetooth/CD Compact Shelf System
www.insigniaproducts.com
Adjusting the tone
To adjust the tone:
In any mode, press TONE on the remote control to select Bass or
Treble. While BASS or TREBLE is on the display, press Vol +/- to adjust
the level.
Selecting the sound equalization
To select the sound equalization:
Press EQ to select the sound equalization you want. Choose one of
the following preset options: JAZZ, ROCK, CLASSIC, POP, LIVE,
DANCE, or OFF (no equalization).
Using Radio mode
Tuning to a station
To play the radio:
1 If necessary, press SOURCE repeatedly to select FM (Tuner) mode or
press FM on the remote control. “TUNER” appears on the display.
2 Adjust the volume to a comfortable level by turning the VOLUME
knob.
3 Press MO/ST to switch between mono and stereo Tuner mode.
4 Tuning to a station:
Press the number buttons on the remote control to select a specific
frequency. For example, to listen to 99.7 MHz, press 9, 9, and 7 to
go to that frequency.
Briefly press TUNE + or TUNE – on the remote control to tune the
radio up or down one frequency step (0.2 MHz). A three second
press and release tunes automatically to the next strong station.
When a strong FM signal is received, “ ” appears on the display if
the Tuner mode is set to Stereo.
Briefly press PRESET + or PRESET – to tune to the next or previous
preset station. Up to 30 stations can be preset.
Pressing and holding PRESET+ or PRESET- automatically cycles
through the presets until the button is released.
5 Scanning for stations:
To automatically scan for stations from low to high, press SEARCH
on the remote control. The searched stations are automatically
saved as presets.
Note
When the searched stations are saved as presets, your existing
presets will be lost.
NS-SH513_14-1143_MAN_V2_ENG.fm Page 12 Tuesday, October 14, 2014 4:09 PM