Filter
Top Products
14
5
SCAN OPERATION
■ Setting tag channels
For more efficient scanning, add desired channels as tag
channels or clear tag channels for unwanted channels. Non-
tag channels will be skipped during scanning. Tag channels
can be assigned to each channel group
(USA, INT, CAN) inde-
pendently.
q Select the desired channel group
(USA, INT, CAN) by push-
ing [CH/WX•
U/I/C/L] for 1 sec., if desired.
w Select the desired channel to set as a tag channel.
e Push both [Y] and [Z] for 1 sec. to set the displayed chan-
nel as a tag channel.
•“TAG” appears in the function display.
r To cancel the tag channel setting, push both [Y] and [Z]
for 1 sec.
•“TAG” disappears.
• Clearing all tag channels in the selected channel group
While pushing and holding both [Y] and [Z], turn power ON
to clear all tag channels in the channel group.
■ Starting a scan
Set the weather alert function, priority scan function, scan re-
sume timer and auto scan function in advance, using SET
mode. (pgs. 18, 19)
q Select the desired channel group (USA, CAN, INT) by
pushing [CH/WX•
U/I/C/L] for 1 sec., if desired.
• When the weather alert function is in use, select the desired
weather channel with [CH/WX•U/I/C/L] and [Y]/[Z].
w Push [SCN•DUAL] to start priority or normal scan.
•“SCAN” blinks in the function display.
•“16” appears during priority scan.
• When a signal is received, scan pauses until the signal disap-
pears or resumes after pausing 5 sec. according to SET mode
setting. (Channel 16 is still monitored during priority scan.)
• Push [Y]/[Z] to check the scanning tag channels, to change the
scanning direction or resume the scan manually.
e To stop the scan, push [SCN•DUAL].
•“SCAN” disappears.
• Pushing [PTT], [16•9] or [CH/WX•U/I/C/L] also stops the scan.
Push
Scan starts.
Push
to stop the scan.
Scan pauses when receiving
a signal and audio is emitted.
DUAL
DUAL
[Example]: Starting a normal scan.
IC-M88-2.qxd 02.11.22 3:24 PM Page 14 (1,1)