Filter
Top Products
Switching from Handset to Speakerphone
I.
Press the [SPKR] key.
2. Return handset to the cradle.
ANSWERING AN INCOMING CALL
Using the Speakerphone (hands free)
Simply press the speakerphone [SPKR] key to be automatically connected to the ringing line, or, press
the flashing [LINE] key on the telephone base to be connected with the outside call.
Using the Handset
If the handset is sitting in the handset cradle (preferred):
I
.Lift
the handset. You will automatically be connected to the ringing line.
2.lf handset is not sitting in the cradle:
3.Press
the [TALK] key. You will automatically be connected to the ringing line.
NOTE:
Pressing any
of
the
dial
[O-9,
*,
#]
keys
on the
handset has the same
affect
as pressing the
FALK
key, you will be automatically connected
to the
ringing line.
HOLD
To place a call on hold
Press the [HOLD] key on either the base or the handset to put a call on hold. The [LINE] LED on the
base will flash rapidly indicating that call is on hold.
To release a call on hold
Press the [LINE] key of the call that is on hold. On the base this will be the [LINE] key with the rapidly
flashing LED.
NOTE:
Once a call has been placed
on hold, it can be accessed
by any extension. [The extension phones
must, however, be IBM system
phones.] The phone will generate a reminder
(two
rapid
rings) every
30 sec-
onds while a call is
on ho/d.
MUTE
The MUTE feature allows you to temporarily stop the voice transmission to the other party on your call.
I. Press the [MUTE] key. The [MUTE] LED will illuminate and the display will show MUTE. You are
now free to converse privately. The other party will not hear your conversation.
2. Press the [MUTE] key again to restore the sound to the other party. The [MUTE] LED will turn
off.
27
-
SMARTHOME.COM™ 1-800-SMART-HOME 949-221-9200 http://www.smarthome.com Order #5125C