Filter
Top Products
NOTE:
The programmable speed dial keys double in function as Direct, Station to Station
(DSS)
keys. The
upper
most
lefl
key is
extension (Station)
I
I,
the next key
to the right is extension
12.
etc. When
using the features intercom
(KM)
and
page, extensions may be dialed by pressing these keys even
aper
each key has also
been programmed
as a speed
dial number.
SETTING THE CLOCK AND CALENDAR
The time and date appear on the display screen when the phone is not in use. To set the clock and cal-
endar:
I.
Press [SHIFT].
2. Press [SET].
3. Enter 2 digits for the MONTH from 0 I
-
I 2.
4. Enter 2 digits for the DAY from 0 I-3 I.
5. Enter DAY of the WEEK from I-7 where I is for SU, 2 is for MO, etc.
6. Enter 2 digits for HOUR from 0 I
-
12.
7. Enter 2 digits for the MINUTE from 00-59.
8. Enter AM or PM, [*] for AM and
[#]
for PM.
9. A short ring will be heard to signal successful programming.
PROGRAMMING TONE OR PULSE MODE
Tone mode is the system default. To change the setting to either pulse or tone:
I. Press [STORE].
2. Press [0], [O].
3. Press [0], [I] for TONE mode, or [0], [0] key for PULSE mode.
4. Press [MUTE].
5. A short ring will be heard to signal successful programming.
PROGRAMMING LINE CONNECTION ON/OFF
This refers to deactivating individual phone lines on an extension. By default, all lines are ON.
To deactivate a phone line(s) for an extension, program that extension to turn OFF the phone line con-
nection for that specific line
(LI ,
L2, L3, or L4). Note that if a phone does not have 4 incoming phone
lines, those lines that are not used will appear lit (the LED on the [LINE] keys will be lit) unless the line
connection is programmed OFF. To set:
I. Press [STORE].
23
SMARTHOME.COM™ 1-800-SMART-HOME 949-221-9200 http://www.smarthome.com Order #5125C