Filter
Top Products
HTC confidential
© 2001, HTC Corporation. All rights reserved. TOTAL 77 CONT.ON. 56 PAGE NO. 55
2. Uncheck USB and COM1 in Connection Settings in ActiveSync if you have installed the
ActiveSync in your PC and make sure the USB port is available.
3. Set the Unit into Bootloader Mode (While Press & Hold Power, Action, and Reset the units),
wait for Serial on display. Message on PDA Screen:
4.Connect the unit to the PC with USB cable or USB cradle, unit display will change to USB
5. Insert 64 MB SD or MMC card into SD slot of PDA Phone
6. On the PC side, Select OK and press ENTER.
7. Following display will appear:
Serial
V1.02