Filter
Top Products
HTC confidential
© 2001, HTC Corporation. All rights reserved. TOTAL 77 CONT.ON. 30 PAGE NO. 29
6.3 Camera Replacement assemby
In case of Camera defective, before replacing with new camera from Stock, please be noticed to
add necessary pre-assembly part into MB and camera in advance.
Apply Aluminium foil on the MB as shown
on figure.
The upper layer paper of foil need to be
removed before fixing camera on it.
Next, apply insulation tape on it
Then, paste the conductive tape on it .
The upper layer paper of foil need to be
removed before fixing camera on it.
Please follow above procedure of Camera
fix on MB.