Grandstream Networks GXV-3000 Answering Machine User Manual


 
GXV-3000 User Manual Grandstream Networks, Inc.
- 44 -
6.2 Configuration File Download
Grandstream SIP Device can be configured via Web Interface as well as via Configuration File
through TFTP or HTTP. “Upgrade Server” is the TFTP or HTTP server path for configuration file. It
needs to be set to a valid URL, either in FQDN or IP address format.
A configuration parameter is associated with each particular field in the web configuration page. A
parameter consists of a Capital letter P and 2 to 3 (Could be extended to 4 in the future) digit numeric
numbers. i.e., P2 is associated with “Admin Password” in the ADVANCED SETTINGS page. For a
detailed parameter list, please refer to the corresponding configuration template of the firmware.
When Grandstream Device boots up or reboots, it will issue request for configuration file named
“cfgxxxxxxxxxxxx”, where “xxxxxxxxxxxx” is the MAC address of the device, i.e.,
“cfg000b820102ab”. The configuration file name should be in lower cases.
6.3 Managing Firmware and Configuration File Download
When “Automatic Upgrade” is set to “Yes”, Service Provider can use P193 (Auto Check Interval, in
minutes, default and minimum is 60 minutes) to have the devices periodically check with either
Upgrade Server. This allows the device periodically check if there are any new changes need to be
taken on a scheduled time. By defining different intervals in P193 for different devices, Server
Provider can spread the Firmware or Configuration File download in minutes to reduce the Firmware
or Provisioning Server load at any given time.