Grandstream Networks GXV-3000 Answering Machine User Manual


 
GXV-3000 User Manual Grandstream Networks, Inc.
- 38 -
Callee Request Timer
If selecting “Yes” the phone will use session timer when it receives inbound
calls with session timer request.
Force Timer
If selecting “Yes” the phone will use session timer even if the remote party
does not support this feature. Selecting “No” will allow the phone to enable
session timer only when the remote party support this feature.
To turn off Session Timer, select “No” for Caller Request Timer, Callee
Request Timer, and Force Timer.
UAC Specify
Refresher
As a Caller, select UAC to use the phone as the refresher, or UAS to use the
Callee or proxy server as the refresher.
UAS Specify
Refresher
As a Callee, select UAC to use caller or proxy server as the refresher, or UAS
to use the phone as the refresher.
Force INVITE
Session Timer can be refreshed using INVITE method or UPDATE method.
Select “Yes” to use INVITE method to refresh the session timer.
Enable 100rel
The use of the PRACK (Provisional Acknowledgment) method enables
reliability to be offered to SIP provisional responses (1xx series). This is very
important if PSTN internetworking is to be supported. A user’s wish to use
reliable provisional responses is invoked by the 100rel tag which is appended
to the value of the required header of initial signalling messages.
Account Ring Tone
There are 4 different ring tone that are defined:
System Ring Tone: when selected, all calls will ring with system ring
tone.
Customer Ring Tone 1 to 3: when selected, GXV-3000 will ONLY
play this ring tone for all the incoming calls for this account.
Send Anonymous
If this parameter is set to “Yes”, the “From” header in outgoing INVITE
message will be set to anonymous, essentially blocking the Caller ID from
displaying.
Auto Answer
When set to “Yes”, GXV-3000 will automatically switch to speaker when
there is an incoming call.
Preferred Vocoder
The GXV-3000 supports up to 5 different Vocoder types including G.711 A-
/U-law, GSM, G.723.1, G.729A/B.
User can configure Vocoders in a preference list that will be included with the
same preference order in SDP message. The first Vocoder in this list can be
entered by choosing the appropriate option in “Choice 1”. Similarly, the last
Vocoder in this list can be entered by choosing the appropriate option in
“Choice 8”.
Preferred Video
Coder
Currently GXV-3000 supports only H.264 codec.