Filter
Top Products
FIRMWARE VERSION 1.0.4.23 GXP2120/GXP2110/GXP2100/GXP1450 USER MANUAL Page 49 of 69
• Voice Mail
Select Account and enter the Voice Mail access number in the
UserID field.
• Call Return
The last answered calls can be dialed out by using Call Return. The
Name and UserID field should be left blank. Also, this option is not
binding to the account and the call will be returned based on the
account with the last answered call.
• Transfer
Select Account, and enter the number in the UserID field to be
transferred (blind transfer) during the call.
• Call Park
Select Account, and enter the call park extension in the UserID field
to park/pick up the call.
• Intercom
Select Account, and enter the extension number in the UserID field
to do the intercom.
• LDAP Search
This option is to narrow the LDAP search scope. Enter the LDAP
search base in the Name field. It could be the same or different from
the Base in LDAP configuration under Advanced Settings. The Base
in LDAP configuration will be used if the Name field is left blank.
Enter the LDAP Name/Number filter in the UserID field.
Multi Purpose Keys X
Assigns a function to the corresponding Multi Purpose Key (Not
applicable to GXP1450). The key mode options are:
• Speed Dial
Select the Account to dial from. And enter the Speed Dial number in
UserID field to be dialed.
• BLF (Busy Lamp Field)
This option has to be supported on the PBX and it indicates the
status of the extension. The three possible states are idle (green),
busy (red), ringing (blinking red).
• Presence Watcher
This option has to be supported by a presence server and it is tied to
the "Do Not Disturb" status of the phone's extension.
• Eventlist BLF
This option is similar to the BLF option but in this case the PBX
collects the information from the phones and sends it out in one
single notify message. PBX server has to support this feature.