Filter
Top Products
FIRMWARE VERSION 1.0.4.23 GXP2120/GXP2110/GXP2100/GXP1450 USER MANUAL Page 12 of 69
INSTALLATION
EQUIPMENT PACKAGING
Table 4: GXP2120/GXP2110/GXP2100/GXP1450 EQUIPMENT PACKAGING
Main Case
Yes (1)
Handset
Yes (1)
Phone Cord
Yes (1)
Power Adaptor
Yes (1)
Ethernet Cable
Yes (1)
Phone Stand
Yes (2)
Wall Mount Spacers
Yes (2)
Quick Start Guide
Yes (1)
CONNECTING YOUR PHONE
Table 5: GXP2120/GXP2110/GXP2100/GXP1450 CONNECTORS
Handset Port
RJ9 handset connector port
Headset Port
2.5mm and RJ9 headset connector port
LAN Port
10/100Mbps RJ-45 port connecting to Ethernet, integrated PoE
PC Port
10/100Mbps RJ-45 port for PC connection
EXT Port
Extension module connection port for GXP2120/GXP2110
Power Jack
5V DC Power connector port
To set up the GXP2120/GXP2110/GXP2100/GXP1450, follow the steps below:
1. Attach the phone stand or wall mount to the back of the phone where there are slots;
2. Connect the handset and main phone case with the phone cord;
3. Connect the LAN port of the phone to the RJ-45 socket of a hub/switch or a router (LAN side of the
router) using the Ethernet cable;
4. Connect the 5V DC output plug to the power jack on the phone; plug the power adapter into an
electrical outlet. If PoE switch is used in step 3, this step could be skipped;
5. The LCD will display provisioning or firmware upgrade information. Before continuing, please wait for
the date/time display to show up;