Filter
Top Products
USING THE BT200 IP PHONE
GETTING FAMILIAR WITH THE LCD / LED
BT200 has a numeric backlit LCD measuring 64mm x 24mm which displays icons to illustrate the mode(s)
of the phone. The LCD turns on with an incoming call. If voicemail is configured, there is also a RED LED
message indicator.
F
IGURE 2: BT200 LCD ILLUSTRATION
T
ABLE 4: LCD ICON DEFINITIONS
Icon LCD Icon Definitions
Connectivity Status / SIP Proxy/Server Icon:
Solid – connected to SIP Server/IP address received
Blinking – physical connection failed
Blank – SIP Proxy/Server not registered
Phone Status Icon:
OFF when the handset is on-hook
ON when the handset is off-hook
Speaker Phone Status Icon:
FLASH when phone rings or a call is pending
OFF when the speakerphone is off
ON when the speakerphone is on
Calls Forwarded Icon:
INDICATES calls are forwarded
Currently not implemented
Alarm Clock Icon:
Currently not implemented
RTP Encryption Icon:
Ensures data security
Currently not implemented
Keypad Lock Icon:
Locks the keypad
Currently not implemented
Handset, Speakerphone and Ring Volume Icon:
Each icon appears next to the volume icon
To adjust volume, use the up/down button
Grandstream Networks, Inc. BT200 User Manual Page 9 of 37
Firmware 1.1.1.14 Last Updated: 12/2006