Filter
Top Products
Grandstream Networks, Inc. BT200 User Manual Page 33 of 37
Firmware 1.1.1.14 Last Updated: 12/2006
RESTORE FACTORY DEFAULT SETTING
WARNING: Restoring the Factory Default Setting will delete all configuration information of the phone.
Please backup or print all the settings before you restoring factory default settings. Grandstream is not
responsible for restoring lost parameters and cannot connect to your VoIP service provider.
Directions for Restoration:
Disconnect network cable and power cycle the unit before resetting factory default settings.
1. Find the MAC address of the device. It is a 12 digit HEX number located on the bottom of the
unit.
2. Press the MENU button for Key Pad Menu options.
3. Press the Up button to “reset”.
4. Enter the MAC address with alphabets and numbers.
5. Press the MENU button again
The BT200 will reboot automatically and restore to factory default setting. The reset is finished when the
LCD stops flashing.