Filter
Top Products
Grandstream Networks, Inc. BT200 User Manual Page 17 of 37
Firmware 1.1.1.14 Last Updated: 12/2006
Menu Item Menu Functions
5
Display “[5] dnS ”
Press MENU to display the DNS address
Enter new DNS address if DHCP is OFF
Press ‘↓’ or ’↑’ to exit
Press MENU to (save and) exit
Must recycle power for changes to take effect.
6
Display “[6] tFtP ”
Press MENU to display the TFTP address
Enter new TFTP server IP address
Press MENU to save
Press ‘↓’ or ’↑’ to exit
7
Display “[7] G-711u 2”
Press MENU to select new codec
Press ‘↓’ or ’↑’ to browse a list of available codecs
line 2 “ - G-711A 2”
3 “ - G-723 1”
4 “ - G-729 2”
5 “ - GS 1”
Press 1 to 9 to indicate number of frames per TX packet
Press MENU to save and exit
Must recycle power for changes to take effect.
8
Display “[8] SIP SP-1”
Reserve for future products.
9
Display “[9] codE rEL”
Press Menu to display the code releases
Press ‘↓’ or ’↑’ to browse
line 1 “b 2006-09-28” – date: boot code
2 “ 1. 1. 1. 3” – version: boot code
3 “P 2006-10-02” – date: phone code
4 “ 1. 1. 1. 14 – version: phone code
5 “1r 2004-05-12” – date: 1st ring tone
6 “ 1. 0. 0. 0” – version: ring tone
7 “2r 2004-05-12” – date: 2nd ring tone
8 “ 1. 0. 0. 0” – version: ring tone
9 “3r 0000-00-00” – date: 3rd ring tone
10 “ 1. 0. 0. 0” – version: ring tone
(all zeroes means unavailable or unsupported)
Press MENU to exit.
10
Display “[10] Phy Addr”
Press MENU to display the physical / MAC address.
Press ‘↓’ or ’↑’ to exit.