Filter
Top Products
TABLE 9: DEVICE STATUS DEFINITIONS
MAC Address
The device ID, in HEX format. This is a very important ID for ISP troubleshooting.
IP Address
This field shows LAN IP address of BT200
Product Model
This field contains the product model info.
Software Version
Program: This is the main software release. This number is always used for
firmware upgrade. Boot and loader are not normally changed.
System Up Time
This field shows system up time since the last reboot.
Registered
This field indicates whether the device is registered to the SIP server(s).
PPPoE Link Up
This field shows whether the PPPoE connection is up if connected to DSL modem.
Detected NAT
Type
Displays type of NAT the BT200 is connected to via its LAN port. It is based on
STUN protocol.
ADVANCED USER CONFIGURATION
To login to the Advanced User Configuration page, please follow the instructions in End User
Configuration to access the login page. The password is case sensitive with a maximum length of 25
characters and the factory default password for Advanced User is “admin”. Advanced User configuration
includes not only the end user configuration, but also advanced configuration such as SIP configuration,
Codec selection, NAT Traversal Setting and other miscellaneous configuration. After login, the embedded
Web server will display the Advanced Configuration page, explained in detail in Table 10: Advanced
Configuration Page Definitions.
F
IGURE 4: ADVANCED USER CONFIGURATION SCREENSHOT
Grandstream Device Configuration
Password
Login
All Rights Reserved Grandstream Networks, Inc. 2005-2006
Grandstream Networks, Inc. BT200 User Manual Page 22 of 37
Firmware 1.1.1.14 Last Updated: 12/2006