Filter
Top Products
The features described in this section are only available if you subscribe to
a Caller Display service from your network provider.
Caller Display means you can see who is calling on your handset display
(provided the number is not withheld, unavailable or is an international
call).
The display shows
PRIVATE ID for a witheld number.
Whether you take a call or not, the caller’s details are stored in the Call list.
The call list stores the last 10 incoming calls. When the call list memory is
full, a new call will take the place of the oldest call. You can display, scroll
through and dial numbers in the list.
The
symbol will be shown on the handset display if you receive a call
in your absence
View Caller Display List
Press to activate the menu
Use S and T to scroll through the menu to select
‘CALL LOG’
Press OK
Use S and T to scroll through the caler display list. The time the
call was received is also displayed alongside the telephone number
Notes: If there are no caller ID telephone numbers in the call log,
EMPTY is displayed
Caller Display Settings
If you have subscribed to a Caller Display service yet telephone numbers
are not displayed when you receive incoming calls, change the caller
display type. There are two caller display types:
• DTMF
• FSK
Press to activate the menu
Use S and T to scroll through the menu to select
‘BASE MENU’
Press OK
Use the keypad to type in your PIN (default 0000)
Press OK to access ‘CALL BAR’
Press and hold for approximately 3 seconds. The current setting
is displayed.
CLI d = DTMF
CLI F = FSK
Press once to change the caller display setting and return to
standby
CALLER DISPLA
Y
33
HANDSET SETTINGS
24