Filter
Top Products
Sometimes special network service numbers are required to precede the
telephone number you are calling. Call by Call allows you to store the
special number and then recall it very easily.
3 call by call numbers can be stored.
Create a Call by Call Entry
Press to activate the menu
Use S and T to scroll through the menu to select
‘CALL BY CALL’
Press OK
Use S and T to scroll through the call by call memory locations (1,
2 or 3) until you find the required entry.
Using the keypad, enter the desired number (up to 10 digits)
Press OK to save the number and return to standby
Note: Use
C/R to correct a mistake. C/R will clear the last digit entered.
To clear all digits, press and hold
C/R, then enter the correct number.
Insert Pause
Inserting a pause provides a delay of 3 seconds. This is necessary with
some telephone systems.
To insert a dialling pause between numbers when storing a number, press
until P appears in the LCD display.
Note: Use
C/R to correct a mistake when entering the VIP telephone
number.
C/R will clear the last digit entered.
To clear all digits, press and hold
C/R, then enter the correct number.
Key Tone Settings
There are 3 options for the key tone each time a key is pressed:
Type 1 = Standard key tone
Type 2 = Two frequency tone
Off = No sound when a key is pressed
Press to activate the menu
Use S and T to scroll through the menu to select
‘KEY BEEP’
Press OK
Use S and T to scroll through the menu to select desired key tone.
Each time you press
S and T, the handset demonstrates the key
tone you have selected
Press OK to save the key tone selection and return to standby
CALL BY CALL
39 18
HANDSET SETTINGS