Filter
Top Products
Dialling Mode (T/P)
In the UK, all telephone exchanges now use Tone dialling. The dial mode
setting is pre-set to Tone.
If your telephone does not dial out, it is probably being used from an older
private switchboard (PBX). In this case, the dial mode must be changed to
Pulse.
Press to activate the menu
Use S and T to scroll through the menu to select
‘BASE MENU’
Press OK
Use the keypad to type in your PIN (default 0000). The numbers will
not appear on the screen
Press OK
Use S and T to scroll through themenu to select
‘DIAL MODE’
Press OK
Use S and T to scroll through the menu to select ‘Tone’ or
‘Pulse’
Press OK to save the dial mode selection and return to standby
Modify a Phone Book Entry
Press to activate the menu
Press OK to select ‘STORE PHONE’
Use S and T to scroll through the stored numbers until you find
the entry to be modified
Use C/R to modify the phone book entry. C/R will clear the last
digit entered. To clear all digits, press and hold
C/R, then enter the
correct number (up to 24 digits)
Press OK to save the modified number and return to standby
Delete a Phone Book Entry
Press to activate the menu
Press OK to select ‘STORE PHONE’
Use S and T to scroll through the stored numbers until you find
the entry to be deleted
Press and hold C/R until the number disappears from the LCD
display
Press OK and return to standby. The telephone number will no
longer be held in the phone book
HANDSET SETTINGS
19
PHONE BOOK
38