Geemarc 350 Cordless Telephone User Manual


 
62
Registration
The supplied handset is already registered with the
number 1. You can register up to 5 handsets to the same
base in order to share the same line with other people.
Before registering a handset to the base, you should
press and hold the
key on the base for about 5
seconds then release it when you have eared an Beep.
1. Press the Menu soft key.
2. Press
or key repeatedly to choose the
Registration, then press the Select soft key.
3. Use
or key to scroll through the Base
names list, press the Select soft key to choose a base.
The handset will search for the requested base and the
relevant information will flash on the LCD.
4. If the base is found, you will be prompted to enter the
PIN code (the default one is 0000). Enter it then press the
Select soft key. If the PIN code is correct, the
Registration tone will sound and then the base assigns a
number to the handset, otherwise a warning tone will
sound, and then the handset returns to the previous
registration state.
5. If the base is not found, the handset will behave
according to the Out of Range condition.
ADVANCED FUNCTIONS