Filter
Top Products
23
All descriptions in this manual assume that the handset is
in standby mode. Set the telephone to standby mode by
pressing the
key.
Making a Call
1. Pick up the handset and press the key.
Result: The In use indicator flashes and the
icon
appears on the LCD.
2. Dial a telephone number.
3. To end the call, either press the
key or replace
the handset on the base.
Note: To make a call to the last number you dialed, use the
Redial feature. For details, see page 29.
You can enter the desired phone number in standby
mode, which allows you to make corrections before
dialing. Follow these steps:
1. Enter a telephone number (up to 32 digits). Check it.
You can also use the
key to insert a pause.
Note: If you make a mistake while entering a number,
press the Erase soft key to clear the last digit.
2. When the number appears correctly, press the
key.
BASIC FUNCTIONS