14
• The supplied battery pack should last
for about a year. When the battery
pack loses its ability to fully recharge,
order a replacement battery pack
from your local RadioShack store
(see “Replacing the Battery Pack” on
Page 33).
SETTING THE DIALING
MODE
Set
T/P
(Tone/Pulse) on the back of the
base for the type of service you have. If
you are not sure which type you have,
after you charge the handset battery
pack, do this simple test.
1. Set
T/P
to
T
.
2. Press
TALK
on the handset and lis-
ten for the dial tone.
3. Press any number other than
0
.
Note:
If your phone system requires
that you dial an access code (9, for
example) before you dial an outside
number, do not press the access
code either.
If the dial tone stops, you have
touch-tone service. Leave
T/P
set to
T
.
If the dial tone continues, you have
pulse service. Set
T/P
to
P
.
4. Press
TALK
on the handset or place
the handset on the base to hang up.
43-732.fm Page 14 Friday, August 13, 1999 1:42 PM