Filter
Top Products
7
IN USE
CHARGE/PAGE
PAGE
5. Connect the power supply cord
into the base and the other end
into an AC outlet. The CHARGE/
PAGE indicator comes on,
showing the battery is charging.
6. Plug the telephone line cord into
the jack marked PHONE LINE on
the back of the unit and plug the
other end into a modular wall
jack.
7. Slip the mounting holes over the
wall plate posts and slide the unit
down firmly into place. (Wall
plate not included.)
8. Remove the handset hook; turn it
upside down, and put it back in
the slot. You need to do this so
the handset doesn’t fall out of the
base.
6
7
8
CAUTION: Use only the Thomson 5-2445 (white)/5-2446 (black) power
supply that came with this unit. Using other adapters may damage the
unit.
5