Filter
Top Products
5
INSTALLATION
DESKTOP INSTALLATION
1. Attach the mounting bracket by inserting the tabs on the smaller end of
the bracket into the slots on the bottom of the base. Push the tabs in on
the larger end of the bracket into the upper slots and snap into place.
2. Plug the telephone line cord into the PHONE LINE jack on the back of
the base and into a modular jack.
3. Plug the power supply cord into the 9V DC jack on the base and into an
AC outlet.
4. Set the TONE/PULSE switch to TONE for touch-tone service, or PULSE
for rotary service. If you don’t know which type of service you have,
check with the phone company.
5. Set the RINGER switch on the handset to ON.
6. Place handset in the base to charge for 12 hours. The CHARGE/PAGE
indicator comes on to show that the battery is charging.
If you don’t charge the handset battery properly (for 12 hours) when you first
set up the phone, the battery’s long-term performance will be compromised.
CAUTION: Use only the Thomson 5-2445 (white)/5-2446 (black) power
supply that came with this unit. Using other adapters may damage the
unit.
TONE/PULSE switch
6
5
3
2
4
1