Filter
Top Products
6
WALL MOUNT INSTALLATION
1. Remove the mounting bracket.
Rotate it so that the bottom of
the phone is flat. Reattach the
mounting bracket by inserting
the tabs into the slots on the top
of the unit first, and then
snapping the bottom tabs into
place.
2. Set the TONE/PULSE switch to
TONE for touch-tone service, or
PULSE for rotary service. If you
don’t know which type of service
you have, check with the phone
company.
3. Set the RINGER switch on the
handset to ON.
4. Place the handset in the base.
Allow the phone to charge
for 12 hours before using the
first time. If you don't
charge the phone properly
when you first set up the
phone, performance of the
battery will be compromised.
1
2
WXYZ
9
TUV
8
PQRS
7
MNO
6
JKL
5
GHI
4
DEF
3
ABC
21
#
OPER
0
TONE
*
MUTE
RE/PA MEM
FLASH
VOLUME
IN USE
RINGER
OFF ON
TALK
LOW
3