Filter
Top Products
18
Problem Solution
Cannot hear phone • Press VOLUME up button on the handset.
You experience • Charge battery.
noise, or fading in • Is handset out of range? Move closer to the base.
and out • Does the base need to be relocated?
• Make sure base is not plugged into an outlet with another
household appliance.
Unit beeps • You may be receiving an out-of-range alert, move closer to
the base.
•Place handset in base for 10 seconds to reset the
phone. The IN USE indicator blinks and then goes out after
the unit resets.
•
Put handset in base for 12 hours to recharge battery.
• Clean charging contacts on handset and base with a soft
cloth or an eraser.
• See solutions for “No dial tone.”
• Replace battery.
Cannot hear the • Set the RINGER to ON.
PAGE/FIND tone
Battery will not hold a • Make sure the battery is properly charged (12 hours).
charge • Make sure battery contacts on both the handset and the base
are making contact and are clean; free of dirt or lint.
• When the handset is placed in the base, make sure that the
base CHARGE/PAGE indicator is on.
Memory Dialing does not
• Memory location must be 2 digits (i.e, 01,02, etc.).
work • Did you program the memory location keys correctly?
• Did you follow proper dialing sequence?
• Make sure TONE/PULSE switch is correctly set.