Filter
Top Products
8
3
SETUP
1. Set the T/P switch to T for touch-
tone service, or P for pulse
(rotary) service. If you don’t know
which type of service you have,
check with the phone company.
2. Set RING switch to ON.
3. Raise the base antenna.
4. Set message length switch to
desired setting.
SETTING DAY AND TIME
1. Hold TIME SET until the unit
announces a day of the week.
2. Press to advance through the
days or to reverse through
the days until the unit announces
the correct day of the week.
3. Press TIME SET to confirm your
choice.
The unit will announce the hour.
4. Press to advance through the
hours or to reverse through
the hours until the unit an-
nounces the correct hour of the
day.
CHAN
RING
ON OFF–RING
PWR ON OFF
BAT LOW
MESSAGE / MEMO
TIME
ANSWER
ON / OFF
SET
MENU
TIME
ANSWER
ON / OFF
SET
MENU
MESSAGE / MEMO
TIME
ANSWER
ON / OFF
SET
MENU
Max 1 min Announce Only
T/P
-
+
Message Length
1
Note: The prompts for “Setup” will cancel after
several seconds if no buttons are pressed.