Filter
Top Products
10
SETTING NUMBER OF
RINGS
This feature allows you to set the
number of rings the answerer will
pick up after if no one answers the
phone. The default is set for four
rings.
1. While the ANSWER/MESSAGE
LED is flashing, press MENU and
the unit will announce the
current number of rings. If the
LED is steady, press MENU twice.
2. Press or to select: two
rings, two or four rings (toll
saver), four rings or six rings.
3. Press MENU.
The unit will confirm your selection.
SETTING REMOTE
ACCESS CODE
1. While the ANSWER/MESSAGE
LED is flashing, press MENU to
and the unit will announce the
remote access code. If the LED is
steady, press MENU 3 times.
2. Press or to choose the
first number of the code.
3. Press MENU to confirm your
choice.
TIME
ANSWER
ON / OFF
SET
MENU
MESSAGE / MEMO
TIME
ANSWER
ON / OFF
SET
MENU
MESSAGE / MEMO
TIME
ANSWER
ON / OFF
SET
MENU
Note: The prompts for “Setup” will cancel after
several seconds if no buttons are pressed.