Filter
Top Products
24
CHANGING THE BATTERY
1. Remove the battery compartment
door.
2. Remove the battery pack.
3. Insert the new battery into the
compartment on the back of the
handset.
4. Replace the battery compartment
door.
5. Return the handset to the base unit
for at least 12 hours to adequately
charge a new battery pack.
BATTERY SAFETY PRECAUTIONS
• Don’t disassemble, mutilate,
puncture, wet, or dispose of battery
in fire. Like other batteries of this
type, if it is burned or punctured, it
could release toxic materials which
can cause injury.
• Keep batteries out of the reach of
children.
Ni-Cd
RBRC
RBRC
WARNING!
THIS SIDE
FACING UP
Your cordless handset is powered by a nickel cadmium battery pack (BT-
12). The battery pack needs to be recharged periodically. A fully charged
battery gives you approximately 4 hours of talk time or 7 days of stand-by
time.
Return the handset to the base whenever possible to keep the
battery adequately charged.
The handset runs on a consumer-replaceable, nickel-cadmium battery
pack. If you experience any of the following problems, you may need to
replace the battery pack: short talk time, poor sound quality, limited range,
CHARGE/IN USE light fails to light. Make sure phone is OFF before you
replace battery.
NOTE: The RBRC
seal on the battery
used in your
Thomson Consumer
Electronics product
indicates that we are
participating in a
program to collect and recycle Nickel
Cadmium batteries throughout the
United States of America. Please call 1-
800-8-BATTERY for information or
contact your local recycling center.