Filter
Top Products
Voicemail
From the Reset Settings Menu:
1. Press the caller ID-volume (5 or 6) button to scroll to the VOICEMAIL sub-menu.
. Press the
mute/menu OK button to enter the menu. The screen displays 4YES
NO. The default setting is NO.
. Use the
caller ID-volume (5 or 6) button to move the cursor to YES or NO.
NOTE: If YES is selected, new voicemail icon is cleared from the LCD and
the VMWI LED is turned OFF (on ALL handsets, and the charge/in use LED
on the base).
4. Press the
mute/menu OK button to save your selection. You will hear a
conrmation tone.
All Settings
As you become familiar with this system, you may prefer to use the system’s original
settings. Follow the steps below to return to the factory default settings.
From the Reset Settings Menu:
1. Press the caller ID-volume (5 or 6) button to scroll to the ALL SETTINGS
sub-menu.
. Press the
mute/menu OK button to enter the menu. The screen displays YES4NO.
The default setting is NO.
. Use the
caller ID-volume (5 or 6) button to move the cursor to YES or NO.
NOTE: If you choose YES all the settings in the programmable menu
are returned to factory default setting.
4. Press the mute/menu OK button to save your selection. You will hear a
conrmation tone.
Telephone Operation
Visual Indicators
Base
The charge/in use indicator on the base will ash to alert you to an incoming call,
during paging, or if you have a message waiting from your service provider. The
indicator will remain lit when a handset is in the base charging or when the line is in
use.