Filter
Top Products
18
Language
From the Initial Setup Menu:
1. Press the caller ID-volume (5 or 6) button to scroll to the LANGUAGE
sub-menu.
. Press
mute/menu OK button to enter the menu. The screen displays 4ENGLISH
ESPANOL.
. Use the
caller ID-volume (5 or 6) button to scroll to the desired language.
ENGLISH is the default setting.
4. Press the
mute/menu OK button to save your selection. You will hear a
conrmation tone and the selected language shows in the display.
Auto Talk
When this function is ON, during an external call, you may lift the handset to answer a
call immediately without pressing any buttons. To end a call, put the handset back on
the base cradle directly.
From the Initial Setup Menu:
1. Press the caller ID-volume (5 or 6) button to scroll to the AUTO TALK sub-menu.
. Press
mute/menu OK button to enter the menu. The screen displays > NO YES.
.
Use the caller ID-volume (5 or 6) button to scroll to your selection. NO is the
default setting.
4. Press the mute/menu OK button to conrm.
Registration
Your packaged handset(s) are pre-registered and ready to use. It is not recommended
that a handset be registered again unless absolutely necessary.
From the Initial Setup Menu:
1. Press the caller ID-volume (5 or 6) button to scroll to the REGISTRATION
sub-menu.
. Press the
mute/menu OK button to enter the menu. The screen displays YES4NO.
The default setting is NO.
. Use the
caller ID-volume (5 or 6) button to scroll to YES or NO.
4. If you select
YES, press the mute/menu OK button. The screen displays HOLD
BASE FIND FOR 5 SECONDS, THEN PRESS MENU OK KEY. (Your handset should be
held near the base during registration process.)