Filter
Top Products
15
5. Use the touch tone pad to enter the handset name/number to be monitored.
NOTE: When this phone system is expanded (up to 6 handsets by
purchase of optional Model 28203 handset with recharge cradle),
handsets are named HANDSET 1, HANDSET 2, HANDSET 3 and so
on respectively.
6. The receiving handset will turn on the microphone and the originating handset will
turn on the speakerphone to monitor sound from the receiving handset.
NOTE: For room monitoring mode to work, the originating handset
must NOT be on the cradle.
NOTE: While in room monitoring mode, the handsets will emit an
alert tone approximately every 5 seconds if there is an incoming
call. You may press the TALK/SPEAKER button to quit room monitor
and answer the call.
NOTE: While in room monitoring mode, the originating handset can
be switched to monitor by handset earpiece by pressing the
TALK/SPEAKER button once. Switch back to speakerphone by
pressing the TALK/SPEAKER button once.
NOTE: Press the END button on the handset to exit room monitor mode.
Alarm Clock
1. Make sure your phone is OFF (not in TALK mode)
. Press the
mute/menu OK button to go to the main menu.
. Use the
caller ID-volume (5 or 6) button to scroll to ALARM CLOCK.
4. Press
mute/menu OK button to enter the menu. The screen displays ON > OFF.
5. Use the
caller ID-volume (5 or 6) button to select ON or OFF. Press
mute/menu OK button to conrm.
6. If
ON is selected, then the screen displays SET ALARM TIME. Use the number keys
to enter the alarm time (for example, 0:10PM) key in 010. Use the
caller ID-volume (5 or 6) button to select AM or PM.
7. Press
mute/menu OK button to display >ONCE OR DAILY and select ONCE or
DAILY.
8. Press the
mute/menu ok button to save selection. You will hear a conrmation
tone and return to main menu.