33
This feature allows you to directly talk to another registered handsets or base by pressing
the button on either handset or base respectively.
1. Make sure your phone is
(not in TALK mode).
. Press the
button on base or handset.
3. A list of registered handsets and base shows on the display.
4. Use the
5 or 6
button to desired handset or base. The default setting at base is
HANDSET 1 and the default setting at handset is BASE.
5. Press the
(SKL) to save your selection.
6. Press and hold the
button to connect with the desired handset or base.
A two-way intercom is possible between the base and cordless handset(s) without
tying up the telephone line and since the telephone line is not used, you can still receive
incoming calls.
1. Make sure the phone is (not in TALK mode).
. Press the
button.
3. Use the
5 or 6
buttons to select the desired handset or base.
4. Press the (SKL).
5. The receiving handset or base is paged, a tone is sounded and the following
information shows in the display:
Originating Handset/Base Receiving Handset/Base