3
Room monitoring may be done from the base or the handset. Begin with unit you want to
monitor with (the microphone);
1. Make sure your phone is
(not in TALK mode).
. Press the
(SKR) to go to the main menu.
3. Use the
5 or 6
buttons to scroll to ROOM MONITOR.
4. Press the
(SKL) to conrm.
5. The list of registered units shows in the display.
6. Use the
5 or 6
buttons to select the unit you wish to monitor.
7. Press the
(SKL) to conrm.
8. The rst unit will then turn on the microphone and the second unit will turn on
earpiece to monitor sound.
During an external call, you may transfer the external call from base to handset(s)
or vice versa.
1. Press the button to put the line on hold. LX ON HOLD shows in the display, where X
is the Line number.
. Use the
5 or 6
buttons to select the desired handset or base. Press the (SKL)
to conrm.
3. Press the button to transfer the call. TRANSFERRING FROM XXXX (where
XXXX is the name of the transferring unit) shows in the receiving unit's display.
4. Press the
(SKL) on the receiving unit to answer the call.