31
Press the (SKR) to put a call on hold. LX ON HOLD shows in the display, where X is the
line number.
To take a call off hold, press the (SKR).
• To switch a call on hold from the base to the cordless handset, press
,
or button on the handset.
This feature helps you locate a misplaced handset.
Press and release the button on the base. A list of registered handsets
show in the display, use the
5 or 6
buttons to select the unit you wish to page, and press
(SKL) to conrm. The cordless handset beeps intermittently and displays PAGING
FROM BASE for about two minutes or until you press (SKL) on the handset or press
on the base.
If one or more handsets become lost, you should de-register all handsets to ensure proper
system operation. Follow the steps below to de-register all handsets at the same time.
1. Unplug the power from the unit.
. Press and hold the
button.
3. Plug in power.
4. Press and hold the
button until the Charge / In-Use indicator blinks.
Release.
5. Press the
button again and the Charge / In-Use indicator will blink
rapidly.
6. A conrmation tone is emitted if de-registration procedure if successful, and all
handsets display PLEASE REGISTER HANDSET. Press .