GE 25404 Intercom System User Manual


 
31
Caller ID
To disconnect both parties:
Hang up the handset, or press the SPEAKER button.
NOTE: If you press the HOLD button to put them on hold first, you may then disconnect from each party individually.
Paging All Stations
1. Lift the handset.
2. Press the PAGE button and listen for the beep. The other stations not in use automatically activate their speakerphones and receive your page.
3. Speak into the handset. You have 30 seconds to page in this mode. After 30 seconds, the page is cancelled.
4. When finished, hang up the handset.
NOTE: You will not receive a page when Do Not Disturb is turned on.
NOTE: Paging can be done with optional headset.
Caller ID (CID)
NOTE: The Caller ID section of this user's guide (from page 31 to page 34) is not applicable to model 25403.
Summary Screen
The summary screen shows the current time, current date, number of CID records to be reviewed and total number of records saved to CID
memory. It is displayed until any button is pressed. Within 60 seconds of receiving a new call, the new caller information is displayed.
Battery indicator
Time and date
12:34 PM 12/25
00 Total CALLS
00 New CALLS
(01)JOHN
Name of phone
Phone ID
CID records
waiting to be
reviewed
Number of records in CID memory