GE 25210 Intercom System User Manual


 
35
Changing the Battery
CAUTION: To reduce the risk of fire or personal injury, use
only the Thomson Inc. approved Nickel-metal Hydride (Ni-
MH) battery model 5-2734, which is compatible with this
unit.
1. Make sure the telephone is
OFF (not in Talk mode) before you replace
battery.
2. Remove the battery compartment door.
3. Disconnect the battery plug from the jack inside the battery
compartment and remove the battery pack from the handset.
4. Insert the new battery pack and connect the cord to the jack inside the
battery compartment.
5. Put the battery compartment door back on.
6. Place handset in the base or handset charge cradle to charge.
Allow the
handset battery to properly charge (for 14 hours) prior to first use or
when you install a new battery pack. If you do not properly charge
the phone, battery performance will be compromised.
Battery Safety Precautions
Do not burn, disassemble, mutilate, or puncture. Like other batteries of
this type, toxic materials could be released which can cause injury.
To reduce the risk of fire or personal injury, use only the
Nickel-metal
Hydride battery listed in the User’s Guide.
Keep batteries out of the reach of children.
Remove batteries if storing over 30 days.
Changing the Battery
NOTE: The RBRC seal on the battery used in your Thomson Inc. product
indicates that we are participating in a program to collect and recycle the
rechargeable battery (or batteries).
For more information go to the RBRC web site at www.rbrc.org
or call 1-800-8-BATTERY or contact a local recycling center.