Filter
Top Products
42
Storing CID Records in Internal Memory
You may also store CID information in the phone’s internal memory. You
may not reformat CID records stored in memory.
TIP: To prevent the CID information from automatically being deleted,
you may want to store it in the phone’s memory.
NOTE: It is important that you format CID records correctly before
storing in internal memory.
1. Make sure the phone is OFF (not in talk mode).
2. Use the cid/vol ( or ) button to scroll to the desired CID record.
3. Press the mem button to display SELECT MEMORY 01-50.
4. Use the touch-tone pad to enter a memory location number (for example,
press 01 to store the record in memory location one).
NOTE: If the memory location is occupied, “REPLACE MEMO?” is
displayed, and you must confirm replacement by pressing the mem
button.
NOTE: Press the *exit button once to keep the previous setting and
return to the sub-menu.
Dialing a CID Number
While reviewing CID records, you may dial the phone number showing in
the display.
1. Make sure the phone is
OFF (not in talk mode).
2. Press cid/vol ( or ) button until the desired CID record shows in the
display.
NOTE: Depending on (a) how the incoming caller’s phone number is
formatted when it is received, and (b) whether or not you previously pre-
programmed your local area code into the set up menu, you may need to
adjust the format of the incoming caller’s stored phone number before
making the call.