Filter
Top Products
26
4. Press mute/prog button to confirm.
5. Press the cid/vol (
or ) button to scroll to the RING SELECT menu.
6. Press mute/prog button to enter the menu. RING SELECT 3 4 5 6 TS
shows in the display.
7. Use the cid/vol ( or ) button to scroll to the your selection. The default
setting is 5.
8. Press the mute/prog button to confirm. You will hear a confirmation tone
and the new setting shows in the display.
NOTE: If you select Toll Saver (TS) the unit answers after the 3rd ring if
there are NEW messages, OR the unit answers after the 5th ring if there
are NO new messages. This allows user to access their answerer from
another location and then hang up after 4 rings to save long distance
charges.
Security Code (for answering machine)
You can access the answering system from a tone dialing telephone in
another (remote) location. The security code is required for remote access,
and it prevents unauthorized access to your answering system.
1. Make sure your phone is
OFF (not in talk mode).
2. Press the mute/prog button to go to the main menu.
3. Press cid/vol (
or ) button to scroll to HANDSET SETUP.
4. Press mute/prog button to confirm.
5. Press the cid/vol ( or ) button to scroll to the SECURITY CODE menu.
6. Press mute/prog button to enter the menu.
SECURITY CODE 1 2 3 shows
in the display.
7. Use the touch-tone pad to enter your new 3-digit security code. The
default setting is 123
.
8. Press the mute/prog button to confirm. You will hear a confirmation tone
and the new security code shows in the display.
NOTE: If you make a mistake, use the del button to backspace and erase
the wrong digit.