Filter
Top Products
39
Changing Records Stored in Memory
Follow items 1 to 7 for Storing Names and Numbers in Memory.
Deleting Records Stored in Memory
1. Make sure the phone is OFF (not in talk mode).
2. Press the mem button to display SELECT MEMORY 01-50.
3. Press the cid/vol ( or ) buttons to scroll to the record you want to
delete or use the touch-tone pad to enter the desired memory location
(01-50).
4. Press the del button to mark the record for deletion. The display
shows DELETE?
5. Press the del button to delete the record. DELETED shows in the display.
NOTE: If you don’t want to change or delete a record, simply press the
*exit button, or wait for one minute to exit the review mode automatically.
Dialing a Number from Memory
1. Make sure the phone is ON (in talk mode) by pressing the TALK/END/
call back or SPKR buttons.
2. Press the mem button to display memo # - -.
3. Use the touch tone pad to enter the memory location number (01-50). The
number dials automatically.
-OR-
1. Make sure the phone is
OFF (not in talk mode).
2. Press the mem button to display SELECT MEMORY 01-50
.
3. Press the memory location for the phone number you want to dial, or use
the cid/vol (
or ) button to scroll to the number you want to dial.
4. Press the TALK/END/call back or SPKR buttons. The number dials
automatically.
Chain Dialing from Memory
Use this feature to make calls which require a sequence of numbers, such
as a calling card number used for a frequently called long distance number.
The following example shows how you can store each part of the dialing
sequence and use chain dialing to make a call through a long distance
service: