Filter
Top Products
46
Handset display
HANDSET NEEDS REGISTRATION
•Follow the programming the telephone procedures to re-register the
handset to the base.
•Press the program/mute key.
HOLD BASE PAGE, WAIT FOR BEEP
shows on the handset display
•Press and hold the page/int button until the unit beeps (within 30
seconds). Handset shows
HANDSET # REGISTERED
and
HANDSET
NAME
comes up on the display.
• Enter the handset name (within 15 characters)
•Press program/mute key to confirm and you will hear a confirmation tone.
Dial tone is OK but can’t dial out
• Make sure the TONE/PULSE setting on the handset is set to the type of
phone service you are subscribed to.
Handset/Base does not ring
• Make sure the handset ringer is turned on and the base ringer is
programmed to HIGH.
• The cordless handset may be out of range of the base. Move closer to
the base.
•You may have too many extension phones on your line. Try unplugging
some phones.
• Check for dial tone.
You experience static, noise, or fading in and out
• The cordless handset may be out of range of the base. Move closer to
the base.
•Relocate the base. Make sure base is not plugged into an outlet with
another household appliance.
• Charge the battery.