Filter
Top Products
26
When the page/int or talk/callback button is pressed on the receiving
handset, the unit goes into intercom mode. When the talk/callback button
on the sending handset is pressed, the call is transferred.
After you select the station you want to transfer the call to, press the talk/
callback button to hang up your station. If the other station does not take
the call within 30 seconds, the call is transferred back to your station.
NOTE: If the talk/callback (or speaker/callback) buttons on the sending
station is pressed before the page/int (or talk/callback or speaker/callback)
button is pressed on the receiving station, the receiving station emits a ringer
tone instead of a page tone. “TRANSFERING FROM” and “handset number or
base” shows in the display.
MUTE
To have a private, off-line conversation use the mute feature. The party on
the telephone line cannot hear you, but you can hear them.
1. While having a phone conversation you may press the program/mute
button.
MUTE ON
shows in the display.
2. Press the program/mute button again to cancel mute and return to your
phone conversation.
TEMPORARY TONE DIALING
This feature is useful only if you use pulse dialing service. Temporary tone
dialing enables pulse (rotary) service phone users to access touch-tone
services offered by banks, credit card companies, etc. For example, when
you call your bank you may need to enter your account number. Using the
temporary tone feature allows you to temporarily switch to touch-tone
mode so you can enter and send your number.
TALK 00:10 VOL 2
MUTE ON
TALK 00:05 VOL 2