Filter
Top Products
32
STORING A REDIAL NUMBER
1. Make sure the phone is OFF (not in talk mode).
2. Press the mem button.
3. Press any number key (01-50) to store the phone number in that
memory location, or press the or button on the handset or base to
select the memory location.
4. Press the mem button and
ENTER NAME
shows in the display.
5. Use the touch-tone pad on your handset or base to enter the name, then
press the mem button and
ENTER TEL NUMBR
shows in the display.
6. Press the redial button to display the redial number.
7. P ress the mem button again to confirm.
NOTE: If the redial number has more than 20 digits, the redial number
cannot be stored in base or handset memory.
INSERTING A PAUSE IN THE DIALING SEQUENCE
If a pause is needed to wait for a dial tone press the # pause button to
insert a delay in dialing sequence of a stored telephone number (for
example, after you dial 9 for an outside line, or to wait for a computer
access tone.) Each pause counts as one digit in the dialing sequence.
REVIEWING, CHANGING OR DELETING STORED NUMBERS
TO REVIEW:
1. Make sure the phone is OFF (not in talk mode).
2. Press the mem button.
3. Press the or button on the handset or base to scroll through the
stored numbers. Or use the touch-tone pad on your handset or base to
enter the memory location number.
PETER CHAN
317 - 123 - 4567
0 3
MEMO
#