Filter
Top Products
13
5. Press the OK soft key to save your selection.
NOTE: Press the EXIT soft key once to keep the previous setting and return to
the main menu.
AREA CODE
Make sure your handset is in the menu mode.
1. Press the cid/vol (up and down arrow) button to move the cursor to
AREA CODE
.
2. Press the OK soft key and SET AREA CODE - - - shows in the display.
(“- - -” is the default setting.)
3. Use the touch tone pad to enter your 3 digit area code.
4. Press the OK soft key to save your selection. The display returns to the
main menu.
NOTE: Press the EXIT soft key once to keep the previous setting and return to
the main menu.
RINGER TONE
Make sure your handset is in the menu mode and make sure the ringer is
turned on. You may choose from six different ringer tones.
1. Use the cid/vol (up or down arrow) button to move the cursor to
RINGER TONE.
2. Press the OK soft key and you will hear the selected ringer tone. The default
setting is 1.
3. Use the touch tone pad to enter a ringer tone number (1 through 6) , or use
the cid/vol (up or down arrow) button to scroll to the desired setting. You
will hear a sample of the ringer tone you select.
4. Press the OK soft key to save your selection. The display returns to the
main menu.
NOTE: Press the EXIT soft key once to keep the previous setting and return to
the main menu.