Filter
Top Products
12
CONNECTING THE TELEPHONE LINE
On the base, plug the one end of the telephone line cord into the jack on
the back of the base and the other end into a modular wall phone jack.
WALL MOUNTING THE BASE
NOTE: For best results, leave the base on a flat surface during initial charging
before you hang it on the wall.
1. Turn the base over.
2. Attach the wall mounting pedestal by first inserting the tabs on the open
edge of the pedestal into the slots on the lower portion of the bottom of
the base. Then push down and snap the pedestal into place.
3. Slip the mounting holes (on the back of the pedestal) over the wall plate
posts and slide the unit down into place. (Wall plate not included.)
PROGRAMMABLE FUNCTIONS
This system uses a menu structure and soft key function buttons to give
you access to all of the built-in features.
USING THE SOFT KEYS
There are three buttons under the display box which represent several soft
key (programmable) functions. Use the buttons to activate the soft key icons
that appear in the display box. You may program the following items with the
soft keys: Language, Area Code, Ringer Tone, Tone/Pulse, Registration,
Deregistration, Walkie-Talkie, and Default Setting.
LANGUAGE
Make sure your phone is OFF (not in TALK mode).
1. Press the MENU soft key to go to the LANGUAGE menu.
2. Press the cid/vol (up or down arrow) button and the OK soft key to go to
the language sub menu.
3. Use the touch tone pad on the handset to select 1ENG, 2FRA, 3ESP, or
use the cid/ vol (up or down arrow) button to scroll to the desired
language. (English is the default setting).