Filter
Top Products
LinkPlus Interface Guide: Fujitsu F9600 Telephone System
PN: 1725-36134-001_E.doc
8
“model” handsets then use the model as a template to program
the other handsets.
• All handsets are different: All handsets are programmed
differently, so each handset will be programmed individually.
Before installation, the parameters of the wired phones should be
verified to plan the parameters required for the handsets.
Directory number and equipment number
The handset supports a total of nine line resources. Which lines
should ring at this handset and which lines will be selected when the
user goes off-hook?
Station name
What name is associated with this extension?
Toll restrictions
Should any special restrictions be assigned for incoming or outgoing
calls?
Programmable buttons
Determine which features, if any, should be programmed on the
SpectraLink Wireless Telephones. These assignments may emulate
assignments on the users’ wired set. Use the key-map diagram for
reference.
If Autodial is to be used on the handsets, one of the programmable
key sequences on the handsets must be used for Program Mode.
If possible, identify a wired set that is programmed exactly or close to
the way the handsets should be programmed. This set can be used to
copy the programming to the new handsets.
Assign Extension Numbers
The wire contractor should inform the system administrator which
port numbers have been designated for the handsets.